On this page
Indian apparel sizing looks straightforward until you notice that a single storefront may sell three fundamentally different things: ready-to-wear in a numeric or alpha scale, semi-stitched garments that the buyer will have finished locally, and unstitched fabric sold by length. Each needs different information, and publishing them all under one size chart is why this category confuses shoppers who are otherwise comfortable buying clothes online.
The Two Ready-to-Wear Scales
Indian ready-to-wear commonly uses a numeric scale for womenswear, running 32, 34, 36, 38 and upward, where the number approximates the bust in inches. Alpha sizing runs alongside it and maps loosely onto the same scale.
| Indian numeric | Approx. bust (in) | Approx. bust (cm) | Common alpha | Common EU |
|---|---|---|---|---|
| 32 | 32 | 81 | XS | 34 |
| 34 | 34 | 86 | S | 36 |
| 36 | 36 | 91 | M | 38 |
| 38 | 38 | 96 | L | 40 |
| 40 | 40 | 101 | XL | 42 |
| 42 | 42 | 107 | XXL | 44 |
The numeric scale is more informative because the number is a measurement rather than a scale position, which is the same reasoning behind body-based labelling in the international standard published by ISO. Where you can, lead with the numeric size and offer the alpha equivalent as a secondary label.
Unstitched and Semi-Stitched Changes Everything
An unstitched suit set is fabric with a defined length, not a garment. A semi-stitched kurta or blouse is partly constructed with seam allowance left for local finishing. Neither has a fit in the usual sense, and publishing a conventional size chart against them is misleading.
For unstitched items, publish fabric length and width for each component, plus the maximum finished size the fabric can support. For semi-stitched items, publish the maximum bust the seam allowance permits and the finished length as supplied. The shopper needs to know what the garment can become, not what it currently is.
This is the same information-design problem as free-size garments elsewhere: the item is defined by a range, and a chart that hides the range transfers the risk to the buyer, as argued in how to write product descriptions that reduce returns.
Blouse Sizing Is Its Own Category
Saree blouses are frequently sold ready-made in a numeric size that refers to the bust, but the fit conventions differ from Western tops: the garment is intended to be close-fitting, and shoppers often expect to have it altered. Publishing the seam allowance available for alteration is therefore as important as publishing the finished measurement.
Sleeve length, back depth and closure position all vary far more than in Western tops and are rarely published. Adding those three rows turns a chart shoppers cannot use into one they can, and it is the same principle as publishing shoulder alongside chest for shirts.
Selling Indian-Made Product Internationally
Two adjustments matter. First, convert inches to centimetres and publish both, because the numeric scale is in inches while most international shoppers measure in centimetres. Second, state the fit character explicitly, because Indian ready-to-wear is often cut closer through the bust and looser through the hip than Western equivalents at the same nominal size.
Where garments are designed for layering or draping rather than for a fitted silhouette, say so. A shopper who reads a kurta size as if it were a Western tunic will size down and be disappointed, and the correction is a single sentence rather than a new chart. The general case for naming fit intent is made in understanding fit types.
Regional Variation Within the Market
India is not a single fit convention. Garment categories that originated in different regions carry different proportional assumptions, and a brand that grades all of them from one base block will find some categories fit well and others consistently draw complaints about the same dimension.
The practical response is not to build separate size systems but to measure and publish per category rather than per brand. A single chart applied across kurtas, western tops and blouses describes none of them accurately, and shoppers notice the inconsistency quickly because they buy across categories from the same storefront and compare.
A Practical Checklist
Publish numeric sizes in both inches and centimetres. Never use a ready-to-wear chart for unstitched or semi-stitched items; give fabric dimensions and maximum finished size instead. Publish seam allowance where alteration is expected. State fit intent in words. And where a single listing covers multiple construction types, separate them clearly rather than relying on the product title to carry the distinction.
Those five habits address most of the confusion in this category, and none of them require new product development. They require the information that already exists in the specification to reach the product page.
Frequently Asked Questions
What does an Indian size 36 mean?
It approximates a 36 inch bust, roughly 91 centimetres, corresponding to a medium in alpha terms and around an EU 38. Because the number is a measurement rather than an arbitrary scale position, it is more informative than an alpha label, so leading with the numeric size and offering the letter as a secondary label serves shoppers better.
How should I list unstitched or semi-stitched items?
Not with a conventional size chart. Publish the fabric length and width for each component and the maximum finished size the material can support. For semi-stitched pieces, publish the maximum bust the seam allowance permits and the length as supplied. The shopper needs to know what the garment can become rather than what it currently measures.
Why do Indian sizes feel different at the same nominal number?
Because the fit conventions differ. Indian ready-to-wear is frequently cut closer through the bust and looser through the hip than Western equivalents at the same nominal size, and many garments are designed for draping rather than a fitted silhouette. Stating the fit intent in words alongside the measurements closes most of that gap.
Should I publish sizes in inches or centimetres?
Both. The Indian numeric scale is in inches, while most international shoppers measure themselves in centimetres. Publishing only one forces half your audience to convert, and conversion errors in this category are common because the numeric label looks like a size rather than a measurement.
